Menu

Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow

Yellow

  • Just one Gripit Yellow plasterboard anchor holds up to 30KG. To install, you will require a 15mm drill bit. 

    Each Gripit Yellow is supplied with a 4.0 X 25mm screw.

  • *Not suitable for full motion, extendable, "pull out" or cantilever TV brackets (only fixed brackets which allow no movement are suitable) or any other object with a continuous moving, rotating or vibrating motion.

    Use Gripit Yellow for real heavy stuff, like curtain rails. They’re strong enough for all the swags and tails as well.

    .

    (Always follow the manufacturers installation instructions for the object you are fitting).



Data Sheets

Maximum safe load weight shown indicates max sheer load (weight suspended from a fixing, mounted in a vertical wall with a load or weight attached to that fixing and acting vertically downwards) on 10mm plasterboard. Independently tested on 10mm and 13mm plasterboard.

See Data Sheet for full loading information, or contact us with any suitability or loading queries. 

**PLEASE NOTE:

  • A bracket, fixing plate or hook needs to be placed between the Gripit and the screw before hanging an object i.e. an object cannot hang directly on the screw of a Gripit.

                                           

  • Do not overtighten: (hand tighten only, do not use electric/ impact screwdrivers, or drills)

Customer Reviews

Based on 16 reviews Write a review

THE UNIQUE 3 WAY GRIPPING SYSTEM ADJUSTS TO THE DEPTH OF YOUR DRYWALL & DISTRIBUTES WEIGHT MORE EFFECTIVELY THAN CONVENTIONAL ANCHORS OR PLUGS.

NO NEED FOR ADDITIONAL STUDS, NOGGINGS OR BATTENS - SAVE TIME, MONEY & LABOUR!

The collar adjusts to the thickness of the drywall from 9.5-15mm

The collar adjusts to the thickness of the drywall from 9.5-15mm

The wings open to hold Gripit in place and the ribs stop it from rotating.

The wings open to hold Gripit in place and the ribs stop it from rotating.

The anchor screw draws the wings into the back of the drywall for a more effective hold.

The anchor screw draws the wings into the back of the drywall for a more effective hold.

JUST DRILL, TAP & TURN IT’S A DODDLE!

Use a flat drill bit to drill a hole in the drywall.

Use a flat drill bit to drill a hole in the drywall.

Top tip - for a dot and dab or double depth drywall, use our undercutting tool.

Use a hammer to gently tap the anchor into the drilled hole.

Use a hammer to gently tap the anchor into the drilled hole.

Top tip - there is an arrow on each Gripit to help you correctly align the anchors in the wall.

Use a screwdriver to turn the cam and open the wings for super grip strength.

Use a screwdriver to turn the cam and open the wings for super grip strength.

Top tip - to reuse Gripit, simply reverse the action to close the wings and remove from the wall. 

Slim gripping wings open in the cavity behind the drywall to provide a secure anchor and distribute weight more effectively than conventional anchors or plugs.

Slim gripping wings open in the cavity behind the drywall to provide a secure anchor and distribute weight more effectively than conventional anchors or plugs.

GUARANTEED FOR 25 YEARS

Gripits are made from Polyacetal which is ultra strong and extremely lightweight. The white collar has a slim profile which is easy to conceal and the turning mechanism makes it super easy to retract the wings for reuse or repositioning.